Enhanced Pultec DIY
Verfasst: Di Aug 29, 2006 7:32 pm
ENHANCED PULTEC DIY
Here is the Thread about the Enhanced Pultec DIY Project.
Component Placement and PCB Layout.
http://www.nrgrecording.de/temporary/PultecV15.pdf
Wiring Layout.
http://www.nrgrecording.de/temporary/Pultec15wiring.pdf
FAQ:
Q: What is it?
A: Its an inductor based Equalizer. Based on the Pulse Technology Pultec EQP1A - but with more frequencies. The frequencies are the same as EveAnna's Manley Enhanced Pultec.
Q: Where can I get pcbs?
A: From Gustav at the prodigy forum
http://www.prodigy-pro.com/diy/index.php?topic=10776.0 18€ for gainstage and filter pcb
I heard that Gustav doesn't sell these pcbse anymore... back to the roots... here is the self-etch-file:
http://www.nrgrecording.de/temporary/En ... layout.pdf
Q: Whats the value of the inductor?
A: 26mH, 39mH, 78mH, 155mH, 312mH
Here is a shop for knobs and the inductor... http://don-audio.com/Startseite
Q: Can I make a tube pultec out of it?
A: Abselutely. You could use Gyraf's nice SRPP Tube Gainstage instead of the Opamp/PSU Gainstage.
Q: I can't find a capacitor with the value X or Y... What can I do?
A: You could wire some capacitors in parallel to get the value you're looking for. Ther are already some paralleled capacitors on the pcb because its easier to find these values in the electronic shops. If you don't have enough space you could solder capacitors to the bottom of the pcb - and don't tell anyone.
Q: Is there a frontpanel template?
A: Yo.
http://www.nrgrecording.de/temporary/Pu ... EQ%203.fpd
http://www.nrgrecording.de/temporary/Ma ... Pultec.fpd
Q: Is it active or passive?
A: There are two pcbs... one is the passive filter (so you could use it with other gainstages like Neve, tube, Gyraf SRPP, whatever) and there is a second, smaller pcb which has a simple opamp gain circuit and a power supply onboard.
Info: I will delete old postings and if there is some important information I will automatically add it to the the first posting.
Here is the Thread about the Enhanced Pultec DIY Project.
Component Placement and PCB Layout.
http://www.nrgrecording.de/temporary/PultecV15.pdf
Wiring Layout.
http://www.nrgrecording.de/temporary/Pultec15wiring.pdf
FAQ:
Q: What is it?
A: Its an inductor based Equalizer. Based on the Pulse Technology Pultec EQP1A - but with more frequencies. The frequencies are the same as EveAnna's Manley Enhanced Pultec.
Q: Where can I get pcbs?
A: From Gustav at the prodigy forum
http://www.prodigy-pro.com/diy/index.php?topic=10776.0 18€ for gainstage and filter pcb
I heard that Gustav doesn't sell these pcbse anymore... back to the roots... here is the self-etch-file:
http://www.nrgrecording.de/temporary/En ... layout.pdf
Q: Whats the value of the inductor?
A: 26mH, 39mH, 78mH, 155mH, 312mH
Here is a shop for knobs and the inductor... http://don-audio.com/Startseite
Q: Can I make a tube pultec out of it?
A: Abselutely. You could use Gyraf's nice SRPP Tube Gainstage instead of the Opamp/PSU Gainstage.
Q: I can't find a capacitor with the value X or Y... What can I do?
A: You could wire some capacitors in parallel to get the value you're looking for. Ther are already some paralleled capacitors on the pcb because its easier to find these values in the electronic shops. If you don't have enough space you could solder capacitors to the bottom of the pcb - and don't tell anyone.
Q: Is there a frontpanel template?
A: Yo.
http://www.nrgrecording.de/temporary/Pu ... EQ%203.fpd
http://www.nrgrecording.de/temporary/Ma ... Pultec.fpd
Q: Is it active or passive?
A: There are two pcbs... one is the passive filter (so you could use it with other gainstages like Neve, tube, Gyraf SRPP, whatever) and there is a second, smaller pcb which has a simple opamp gain circuit and a power supply onboard.
Info: I will delete old postings and if there is some important information I will automatically add it to the the first posting.